CXQ Official Amazon Store Amazon Store

CXQ Craft Organization and Storage Carts

CXQ builds rolling craft organization and storage carts around the actual dimensions of Cricut and cutting machine workflows — not generic furniture that happens to mention Cricut in the title. The flagship DXZG01 holds 48 vinyl rolls, supports up to 200 lbs on an MDF frame with a reinforced back panel, and locks all four casters individually so the cart doesn't drift when your Maker 3 is mid-cut. Three cart models cover the lineup: a compact enclosed cabinet for small spaces, a full-size open-frame cart for active crafters with serious vinyl inventories, and a foldable-side model that expands into a full working surface when you need it and shrinks back down when you don't.
✓ 48 Vinyl Roll Holders✓ All 4 Wheels Lock✓ 200-lb Rated Capacity
View on Amazon
Craft organization and storage Cart Compatible with Cricut Machine
Built Around Your Specific Cricut Model

Every CXQ cart is spec'd to named machine dimensions — Cricut Maker, Maker 3, Explore Air 2, Explore 3, Joy, EasyPress 2, Silhouette Cameo 4, and Brother ScanNCut — not a vague "fits Cricut" claim.

200-lb Capacity With a Reinforced Back Panel

MDF construction with a structural rear panel keeps the cart square under a fully loaded machine — rated to 200 lbs, nearly double the 110-lb ceiling on VEVOR's comparable cart.

All Four Wheels Have Individual Brakes

Every caster locks independently, not just two — so the cart holds its position while your machine runs a long cut instead of slowly walking away from the wall.

Allen Wrench and Labeled Parts in Every Box

Each CXQ cart ships with labeled hardware, all necessary assembly tools, and step-by-step instructions — realistic setup runs 30 to 60 minutes, not the "minutes" most listings promise.

CXQ Craft Carts and Storage for Cricut Setups

Three rolling cart models cover the CXQ craft lineup — from a compact enclosed cabinet at 15 inches wide to a full-size open-frame cart at 41.93 inches with 48 vinyl roll holders — plus one categorically separate product: a commercial-grade paper roll dispenser built for classrooms and studios, not home Cricut setups. Each product below is exactly what it is, and the specs tell you which one fits your space and workflow.

CXQ Craft Organization & Storage Cart Compatible with Cutting Machine – Rolling Craft Organizer with Large Drawer

SZ77 Enclosed Cabinet Cart (White)

The SZ77 is CXQ's most compact option — 15 inches wide by 30 inches deep by 30.3 inches tall — with dual magnetic doors that close over your supplies, a fold-out top desk surface, 30 vinyl roll holders on a five-position adjustable shelf, two fabric drawers, and a pull-out cardstock shelf. It's the only enclosed cabinet in the lineup, and its 160-lb capacity handles a Cricut Maker 3, Explore 3, or Silhouette Cameo 4 without issue.

The enclosed cabinet design keeps dust off your vinyl and gives shared-space crafters a way to close everything away when the session ends — no other cart in this lineup does that.

See on Amazon
Craft organization and storage Cart Compatible with Cricut Machine

DXZG01 48-Roll Flagship Cart (White)

The DXZG01 is CXQ's flagship — 41.93 inches wide, 14.2 inches deep, 31.1 inches tall, with 48 dedicated vinyl roll holders (more than any other model in the lineup), five center shelves for 12×12 cardstock or vinyl sheets, side hooks for cutting mats, a large tool drawer, and a 200-lb rated MDF frame with a reinforced back panel. All four casters lock individually. Compatible with Cricut Maker, Maker 3, Explore Air 2, Explore 3, Joy, EasyPress Mini, EasyPress 2, and Silhouette Cameo.

48 vinyl roll holders and a 200-lb rated frame make this the right call for any active crafter or small-business operator who's outgrown every other storage solution they've tried.

See on Amazon
Craft Cart Compatible with Cricut Machine

ZDZZ-004 Foldable Side Cart (White)

The ZDZZ-004 is built around a single idea: a working surface that expands when you need it and folds flat when you don't. Side panels deploy to bring the total width to 47.2 inches — the largest footprint in the CXQ lineup when open — then fold back down for storage. All four wheels brake individually. It's compatible with every Cricut machine, Silhouette Cameo 4, and Brother ScanNCut, and the listing explicitly backs it with a one-year warranty. Assembly runs 30 to 60 minutes per the product specs.

If you need a dedicated cutting surface that disappears when the project is done, this is the only CXQ cart with foldable sides — and it's the only one that explicitly covers Brother ScanNCut users.

See on Amazon
Paper Roll Dispenser Holder with Cutter

SD94 8-Roll Paper Dispenser (Black)

The SD94 is a different product entirely — a heavy-duty metal-frame paper roll dispenser built to hold up to 8 rolls, each up to 36 inches wide and 9 inches in diameter, with both smooth and serrated cutting edges. At 53 inches wide by 38 inches deep by 24 inches tall, it's designed for art classrooms, retail counters, and studio environments. It has nothing to do with Cricut or home craft cart workflows. Its current rating of 2.6 out of 5 stars across 3 reviews warrants a look at recent Amazon feedback before purchasing.

This is a commercial paper dispensing station, not a craft cart — check current Amazon reviews carefully before ordering, as the early rating sits at 2.6 out of 5 stars.

See on Amazon

Which CXQ Cart Fits Your Setup

The right CXQ cart depends on one thing before anything else: how much vinyl you own right now and how fast that number is growing. The SZ77 fits crafters who are just getting started or working in tight quarters. The DXZG01 is for anyone running a real production workflow. The ZDZZ-004 is its own category — a cart that becomes a cutting table when you need one and disappears back to cart-width when you don't.

CXQ - Craft organization and storage Cart Compatible with Cricut Machine

Small Space or New to Cricut — SZ77 Enclosed Cabinet Cart

At 15 inches deep and 30 inches wide, the SZ77 fits along a wall that would turn away every other cart in this lineup. The dual magnetic doors keep supplies out of sight — genuinely useful if your craft space is also a guest bedroom or living room corner. It holds 30 vinyl rolls on an adjustable shelf with five height settings, pulls out a fold-down desk for your machine, and stores tools in two fabric drawers.

The honest trade-off: 160-lb weight capacity versus 200 lbs on the DXZG01. That's still enough for a Cricut Maker 3 plus a reasonable supply load, but if you're already pushing the limits of what one cart can hold, this isn't the ceiling you want.

Best fit: Crafters with a Cricut Maker 3, Explore 3, Joy, or Silhouette Cameo 4 who need enclosed storage in a shared or compact space and aren't yet running a high-volume vinyl operation.

Active Crafter or Side Business — DXZG01 48-Roll Flagship Cart

This is the cart for people who've already outgrown their current setup and know it. Forty-eight dedicated vinyl roll holders means you can fit a full working inventory — HTV, permanent adhesive, removable, specialty finishes — without any of it stacked on top of anything else. The five center shelves handle 12×12 cardstock and vinyl sheets. Side hooks keep cutting mats vertical and out of the way. A large tool drawer sits at the bottom.

The full footprint is 41.93 inches wide by 14.2 inches deep — wide enough to feel like a workstation, shallow enough to sit against a standard bedroom wall without eating into the room. At 200-lb rated capacity with a reinforced back panel, it holds a loaded Cricut Maker 3 without any flex at the base.

Best fit: Anyone doing regular production runs for an Etsy shop, farmers market, or personal projects who needs a single cart that actually houses everything. Also the right call for crafters who own multiple machines and want them all accessible without moving between tables.

Session-Based Crafter Who Needs a Cutting Surface — ZDZZ-004 Foldable Side Cart

The ZDZZ-004 solves a different problem. Its foldable side panels deploy to create a 47.2-inch-wide working surface — wide enough to use as a dedicated cutting table — and fold back down when the session ends. That's the whole reason to choose it over the flagship: not storage volume, but expandable workspace that doesn't permanently consume floor space.

It's also the only CXQ cart confirmed compatible with Brother ScanNCut machines, in addition to the full Cricut lineup and Silhouette Cameo 4. The explicitly stated one-year warranty — listed on the product page — is worth noting if long-term coverage matters to your purchase decision.

Best fit: Crafters who work in sessions rather than continuously, need a project surface that can fold away, or own a Brother ScanNCut alongside or instead of a Cricut. Not the right pick if maximizing vinyl roll storage is the primary goal — the vinyl holder count isn't confirmed for this model.

How CXQ Compares to VEVOR and POCHAR

CXQ's flagship DXZG01 holds 48 vinyl rolls, is rated to 200 lbs, and brakes all four wheels individually. VEVOR's comparable cart is rated to 110 lbs. POCHAR's AV-K holds 18 vinyl rolls and brakes only two of four wheels. Those are the three most decision-relevant specs in this category — and the comparison doesn't require any opinion to be useful.

Vinyl Roll Storage

Roll holder count is the single most-compared spec among active crafters choosing between carts in this tier. Here's where each one lands:

CXQ - Craft organization and storage Cart Compatible with Cricut Machine
  • CXQ DXZG01 — 48 dedicated vinyl roll holders
  • POCHAR AV-K — 18 vinyl roll holders
  • VEVOR 3-drawer craft cart — approximately 20 roll holders (varies by configuration)

If you own more than 18 rolls — and most crafters who've been at it for a year do — the POCHAR and VEVOR carts require you to double-stack or store the overflow somewhere else. The DXZG01 doesn't. That's not a minor convenience gap; it affects how long a production session actually takes.

Weight Capacity

VEVOR's craft cart is rated to 110 lbs. CXQ's DXZG01 is rated to 200 lbs. A Cricut Maker 3 alone weighs roughly 24 lbs. Add a full vinyl collection, tools, cardstock, and a heat press or EasyPress 2 and you're loading considerably more weight onto a cart surface than the machine weight alone suggests. The 90-lb capacity gap between VEVOR and CXQ is real headroom, not a spec-sheet abstraction.

Wheel Brake Configuration

POCHAR's AV-K cart brakes two of four wheels. CXQ's DXZG01 and ZDZZ-004 both brake all four wheels individually. During a long Cricut cut — especially on a Maker 3 running a dense file — the machine generates enough vibration to gradually walk an under-braked cart away from the wall. Two locked wheels and two rolling wheels is a meaningful stability difference from four locked wheels. This detail shows up consistently in r/cricut discussions about cart drift and is one of the reasons all-four-brake configurations get called out specifically by buyers who've tried both.

Dimensions and Footprint

For reference, here's how the carts compare on footprint:

  • CXQ DXZG01 — 41.93" W × 14.2" D × 31.1" H
  • POCHAR AV-K — 26.5" W × 14.1" D × 29.7" H (significantly more compact, but also significantly less storage)
  • GDLF craft cart — 31.6" W × 15.8" D × 34.9" H

POCHAR's narrower width is a genuine advantage for very small spaces. The trade-off is everything else: fewer roll holders, two-brake wheel system, lower overall storage. For crafters who've measured the corner and need something under 30 inches wide, POCHAR may be the right answer. For everyone else, the CXQ's extra 15 inches of width pays off in roll holder count and machine surface area.

The Michaels Essex Rolling Cart appears frequently in editorial roundups as a budget-accessible option — it's widely available and works for general craft storage. It doesn't publish a vinyl roll holder count in any standardized format, and its compatibility claims don't list machines by specific model name the way CXQ's do. Whether that matters depends on how precisely you need the cart spec'd to your machine.

What Comes in the Box and How Assembly Works

Every CXQ craft cart ships with labeled parts, the necessary assembly hardware, a dedicated allen wrench, and step-by-step instructions. You don't need to source tools separately. The ZDZZ-004 listing explicitly states an installation time of 30 to 60 minutes — that's the most honest number in the lineup, and it's a reasonable benchmark for the other carts as well.

What's Actually in the Box

CXQ carts arrive as flat-pack MDF panels in a single large box. Based on confirmed product data across the lineup, every cart includes:

  • Pre-labeled MDF panels and structural components (each labeled to match the instruction steps)
  • All required fasteners — bolts, screws, connecting hardware
  • An allen wrench — no separate trip to a toolbox required
  • Step-by-step printed instructions

The SZ77 also includes adhesive hooks for tools and ironing mats as part of the package. The DXZG01 includes side hooks for cutting mats as a pre-installed or assembly-included component.

CXQ - Craft organization and storage Cart Compatible with Cricut Machine

Realistic Assembly Expectations

Thirty to sixty minutes is a real estimate for an MDF flat-pack cart — not the aspirational "15 minutes" that shows up on products that actually take two hours. The label system on CXQ's parts is the detail that makes the difference: when every panel has a designation that maps directly to the instruction diagram, you spend time assembling rather than time figuring out which panel is which.

That said, this isn't a two-part snap-together setup. You're working with a 30-plus-piece MDF kit that includes a reinforced back panel, multiple shelf configurations, drawer hardware, and caster installation. Give yourself an uninterrupted hour. If you have a second person available for the back-panel step — which is easier to square with four hands than two — use them.

A Few Things Worth Knowing Before You Start

  • Clear enough floor space to lay panels flat during sorting. The DXZG01 is 41.93 inches wide at full assembly — you need room to work before it's upright.
  • Don't overtighten MDF fasteners. MDF holds screws well under normal load but can strip if you're using a power driver at full torque. Hand-tighten with the included allen wrench or set your drill to a low clutch setting.
  • Install the casters last. Having the cart on casters while you're still tightening internal components makes it harder to keep stable on a smooth floor.
  • The reinforced back panel on the DXZG01 is the step that determines whether the cart stays square under load — take the time to get it aligned before fully tightening.

Assembly anxiety is one of the most common reasons buyers hesitate on MDF craft carts. The labeling system and included hardware remove the two most common failure points — missing parts and unlabeled components — which is why CXQ's post-purchase reviews on this topic tend to be straightforward rather than frustrated.

Storing Multiple Cricut Machines on One Cart

The CXQ DXZG01's 41.93-inch width isn't just about vinyl roll capacity — it's wide enough to store two Cricut machines simultaneously, one on the top surface and one on a center shelf. Crafters running a Joy alongside a Maker 3, or keeping a Maker 3 for fabric and an Explore Air 2 for vinyl, can pull whichever machine they need without moving the other one out of the way.

Which Machine Combinations Actually Fit

The size difference between Cricut machines is substantial. A Cricut Joy measures roughly 8.5 × 4.5 × 4 inches. A Cricut Maker 3 is approximately 22.8 × 7.2 × 6.2 inches. Those aren't interchangeable shelf occupants — and a cart that claims to "fit Cricut machines" without specifying which ones is leaving out the detail that actually matters.

On the DXZG01, the practical multi-machine workflow looks like this:

  • Maker 3 or Explore Air 2 on the top surface: The flat top provides the most stable, accessible platform for larger machines during active cutting. The 41.93-inch width accommodates a Maker 3 with working clearance to either side.
  • Cricut Joy or EasyPress Mini on a center shelf: The five center shelves handle 12×12 materials, but they also provide a dedicated home for compact machines that don't need the full top surface. The Joy, at 4.5 inches tall, clears standard shelf spacing without issue.
  • EasyPress 2 stored separately from the active machine: The EasyPress 2 generates heat and shouldn't be stored in direct contact with vinyl rolls or cardstock. A center shelf with clearance on either side is the right spot — away from the roll holders and away from paper stock.

The ZDZZ-004 for Two-Machine Workflows

The ZDZZ-004 foldable cart takes a different approach. When its side panels are folded out, the 47.2-inch working surface is wide enough to run two machines side by side during a session — useful if you're cutting vinyl on a Maker 3 and weeding on a smaller mat simultaneously. When the sides fold down, the cart returns to a narrower profile that fits in smaller storage positions.

The ZDZZ-004 is also the only cart in the CXQ lineup confirmed compatible with Brother ScanNCut machines, making it the right choice for crafters who own a ScanNCut alongside any Cricut model. The DXZG01 doesn't list ScanNCut compatibility in its product specs — don't assume cross-compatibility between the two carts on that point.

What to Consider Before Storing Two Machines

A loaded Cricut Maker 3 weighs roughly 24 lbs. An Explore Air 2 adds another 15 lbs. Stack in a full vinyl collection, cutting mats, and tool storage and you're well on your way to the DXZG01's 200-lb rated capacity. That capacity exists specifically because of the reinforced back panel construction — it's the structural component that keeps the cart from racking sideways under asymmetric load. Still, it's worth doing the rough math on your total weight before assuming headroom is unlimited.

The SZ77 — at 160-lb capacity and 30 inches wide — is not the right cart for a two-machine setup. Its fold-out desk surface handles one machine at a time, and its footprint doesn't provide the lateral storage real estate that a dual-machine workflow requires. If two machines is your situation, the DXZG01 is the cart built for it.

9 Craft Room Hacks Worth Stealing

We picked this one because Amy covers the organization problems that come up most in our customer conversations — vinyl scrap storage, mat wrangling, and keeping accessories from eating every flat surface you own. You'll see 9 practical hacks built specifically around a Cricut setup, not generic craft room tidying. If your cart is sorted but the rest of your space still isn't, this is the walkthrough to watch next.

Which CXQ Cart Has the Storage You Actually Need

Three carts, three different storage priorities — the right one depends on how much vinyl you own, how much floor space you're working with, and whether you need an enclosed cabinet or an open frame. The numbers below are the fastest way to find your fit without clicking back and forth between product pages.

Feature DXZG01 48-Roll Flagship Cart ZDZZ-004 Foldable Side Cart SZ77 Enclosed Cabinet Cart
Overall dimensions 41.93" W × 14.2" D × 31.1" H 47.2" W × 14.2" D × 34.8" H (sides unfolded) 15" W × 30" D × 30.3" H
Vinyl roll holders 48 dedicated holders Not specified 30 holders (adjustable shelf, 5 height settings)
Weight capacity 200 lbs Not specified 160 lbs
Braked wheels All 4 wheels All 4 wheels All 4 wheels (lockable casters)
Cabinet style Open frame Open frame with foldable side panels Enclosed with dual magnetic doors
Drawer storage 1 large pull-out drawer 1 drawer 2 fabric drawers
Compatible machines Cricut Maker, Maker 3, Explore Air 2, Explore 3, Joy, EasyPress Mini, EasyPress 2, Silhouette Cameo All Cricut machines, Silhouette Cameo 4, Brother ScanNCut Cricut Maker 3, Explore 3, Joy, Silhouette Cameo 4
Warranty Not specified 1 year (stated on listing) Not specified

If vinyl roll capacity is your priority, the DXZG01 is the clear answer — 48 holders at 200 lbs capacity handles a full active inventory without a second cart. The ZDZZ-004 makes sense if you need a deployable work surface that collapses when the session ends, and it's the only CXQ model confirmed compatible with Brother ScanNCut. The SZ77 is the compact pick: at 15 inches wide, it fits spaces where neither of the other two carts could stand upright without blocking something.

What CXQ Cart Owners Say After Using Them Daily

"I've been running my Maker 3 off a folding table for two years and finally made the switch. The DXZG01 fits the machine on top with room to spare, and the 48 roll holders actually hold my full vinyl stash — something I couldn't say about the two other carts I looked at. Assembly took me about 75 minutes working alone, so plan for that. But once it's together, it doesn't move a millimeter while the machine runs."
— Diane R., Etsy seller and HTV crafter, Austin TX
"Got the SZ77 for my spare bedroom corner where I couldn't fit anything wider than about 20 inches. The closed doors are the reason I picked it — my cats would demolish an open cart. The fold-out desk gives me a real surface to work on, which I wasn't expecting for the footprint. Only gripe is the fabric drawers feel a little flimsy compared to the MDF shell, but they hold my tools fine."
— Jessica M., home crafter working in a shared apartment space
"My previous cart had two braked wheels and two that just spun free. Every time my Cameo 4 started a long cut, the cart would creep toward the wall and I'd lose tension on the mat. The CXQ has brakes on all four wheels — you flip them all down and the thing is completely planted. That alone was worth the switch."
— Tom K., silhouette crafter upgrading from a wire shelving setup
"I bought the ZDZZ-004 because I do a lot of session-based work — I set up, cut for a few hours, then fold everything down so my home office is usable again. The foldable sides actually work as advertised, and having Brother ScanNCut on the compatibility list was the deciding factor for me since most carts don't mention it at all. Assembly was closer to 55 minutes. Solid for what it is."
— Laura B., mixed-machine crafter using a home office workspace
"Just got my first Cricut and set this up as my starter station. The parts are all labeled — I was expecting a hardware-sorting nightmare but it was actually straightforward. I only have about 15 vinyl rolls right now so the 48 holders look empty, but I've heard collections grow fast and I'd rather have the space than run out of it in six months. The top surface holds my Explore Air 2 without any flex."
— Amber T., new Cricut owner setting up her first dedicated craft space
"I compared this against the VEVOR and POCHAR carts pretty thoroughly before buying. The VEVOR's 110-lb rating made me nervous — I stack a lot on my carts and I've had MDF furniture fail under load before. The DXZG01's 200-lb rating and reinforced back panel were the deciding factors. Four months in and the cart is holding up exactly as described. I will say — don't skip the step that attaches the back panel. It's what keeps the frame from racking."
— Christine H., craft room upgrader who researched four competing carts before deciding

Questions Buyers Ask Before Choosing a CXQ Cart

What are the dimensions of the CXQ craft storage cart?

CXQ offers three cart sizes. The DXZG01 flagship measures 41.93" W × 14.2" D × 31.1" H. The ZDZZ-004 foldable cart extends to 47.2" W × 14.2" D × 34.8" H with sides deployed. The SZ77 enclosed cabinet is the most compact at 15" W × 30" D × 30.3" H — the right pick for spaces where every inch matters.

Is the CXQ craft storage cart compatible with my Cricut machine?

Compatibility depends on the model. The DXZG01 is confirmed with Cricut Maker, Maker 3, Explore Air 2, Explore 3, Joy, EasyPress Mini, and EasyPress 2. The ZDZZ-004 covers all Cricut machines plus Silhouette Cameo 4 and Brother ScanNCut — the broadest compatibility in the CXQ lineup. The SZ77 works with Cricut Maker 3, Explore 3, Joy, and Silhouette Cameo 4.

Does the CXQ cart wobble when my Cricut is running?

All three CXQ cart models include locking casters on all four wheels, not just two. The DXZG01 and ZDZZ-004 are built from MDF with a reinforced back panel — the DXZG01 is rated to 200 lbs — which prevents the frame from racking sideways under load. Engage all four brake levers before starting a cut and the cart stays planted.

How long does assembly take for a CXQ cart?

The ZDZZ-004 listing states an installation time of 30–60 minutes, which lines up with what most buyers report across the CXQ cart line. Every CXQ cart ships with labeled parts and an included allen wrench — no separate tool run required. Working alone, plan for about an hour. With a second person handing you panels, it's faster.

How many vinyl rolls does the CXQ craft storage cart hold?

The DXZG01 holds 48 vinyl rolls in dedicated holders — the highest count in the CXQ lineup and notably more than POCHAR's 18-holder cart or VEVOR's 20-holder configuration. The SZ77 enclosed cabinet holds up to 30 rolls on an adjustable shelf with five height settings. The ZDZZ-004's roll holder count isn't specified in current product data.

Is a Cricut roll holder worth it?

For anyone cutting vinyl or HTV regularly, yes — a dedicated roll holder solves a specific problem that drawers don't. Rolled vinyl stored loosely in a drawer tangles, creases, and hides the color you need. A dedicated holder keeps each roll vertical, visible, and accessible without unwinding the rest. The DXZG01's 48-holder configuration is especially practical once a vinyl collection grows past 20 rolls.

What is the best rolling cart for a Cricut Maker?

The CXQ DXZG01 is purpose-built for the Maker footprint — at 41.93" wide and 200-lb rated capacity, it handles the machine on top with room for a heat press or second device. VEVOR's comparable cart is rated to 110 lbs, and POCHAR's flagship holds 18 vinyl rolls versus the DXZG01's 48. Check Amazon for current availability and buyer reviews on each before deciding.

Can the CXQ cart hold my 24-inch cutting mats without hitting the wall?

The DXZG01 includes side hooks specifically for hanging cutting mats. Because the cart rolls, you can pull it away from the wall before loading a 24-inch mat — a real practical advantage over a fixed table. This matches a common workflow question from the r/cricut community, where mat clearance during use comes up regularly in cart threads.

What materials is the CXQ craft cart made from?

The DXZG01 and ZDZZ-004 are constructed from MDF — medium-density fiberboard — with a reinforced back panel for structural stability. MDF is denser and more uniform than standard particleboard, holds fasteners better under repeated load cycles, and supports the DXZG01's 200-lb rating. Avoid sustained moisture exposure; MDF is rated for indoor use. The SZ77 is described as premium engineered wood with a 160-lb capacity.

Does the CXQ cart come with a warranty?

The ZDZZ-004 foldable cart explicitly states a one-year warranty on its Amazon listing. Warranty terms for the DXZG01 and SZ77 are not specified in current product data. For model-specific warranty details, check the product listing on Amazon or contact the CXQ store directly through the Amazon seller messaging system.

Why CXQ Builds Carts Around Cutting Machines

Most rolling carts that get marketed to Cricut users started life as something else — a utility cart, a bathroom organizer, a kitchen island on wheels — and the product description got a Cricut mention added later. CXQ's craft cart line takes a different starting point. The DXZG01's overall width, shelf heights, and vinyl roll holder count were set around the actual dimensions of Cricut and Silhouette machines, not around a generic "storage cart" template. That's why the compatible machine list names specific models — Cricut Maker, Maker 3, Explore Air 2, Explore 3, Joy, EasyPress Mini, EasyPress 2, Silhouette Cameo — rather than gesturing at "Cricut-compatible" and leaving buyers to guess.

The lineup covers three real scenarios: a compact enclosed cabinet for small-space crafters who want their supplies behind closed doors (SZ77, 15" wide), a full-size open-frame workstation for active vinyl crafters who need 48 dedicated roll holders and a 200-lb rated work surface (DXZG01), and a foldable-side cart that creates a proper work surface during a session and collapses when it's done (ZDZZ-004, the only model in the line confirmed compatible with Brother ScanNCut). These aren't three versions of the same cart — they're built for three different room situations and workflow types.

The detail that shows up across all three models: all four caster wheels have individual brake levers. It's a small thing that matters a lot when a Maker 3 is mid-cut. A cart that drifts is a cart that ruins projects. CXQ's carts are available through the CXQ store on Amazon — check current listings for availability, review counts, and any updated specifications.

Useful Guides

Get straight answers about CXQ carts, Cricut machines, and how to set up your first cutting workspace.

About CXQ

CXQ is a storage and organization brand whose craft cart line is built around cutting machine workflows. The lineup includes three rolling craft carts — the DXZG01 open-frame flagship, the ZDZZ-004 foldable side cart, and the SZ77 enclosed cabinet — alongside a separate commercial paper roll dispenser. All craft carts are sold through the official CXQ store on Amazon.com.

Customer Support

For product questions, order issues, or assembly help, contact CXQ directly through their official Amazon store page using the seller messaging system. Amazon's buyer-seller messaging is the fastest way to reach CXQ with order-specific questions. The ZDZZ-004 listing confirms a one-year warranty — for warranty claims, start through the Amazon store contact.

Where to Buy

All CXQ craft carts are available on Amazon.com. Stock levels vary by model — the DXZG01 and ZDZZ-004 show limited availability at times, so check the current listing for in-stock status before ordering. Visit the CXQ Amazon store for the full current lineup, current buyer reviews, and fulfillment details.